0Item(s)

You have no items in your shopping cart.

Flir Dji

Product was successfully added to your shopping cart.

Request a quote for

DJI Ronin 2 with Ready Rig & Pro Arm Kit

Need a Proposal or Have a Question? Please fill out the form below
and one of our aerial experts will be in touch immediately.

We would never share your information with third parties. Privacy Policy

Dronefly is an Authorized Dealer of

 

DJI Ronin 2 with Ready Rig & Pro Arm Kit

SKU#:
S-DJI-RON2-RR-PA
//
MFG#:
CP.QT.00000047.01


DJI Ronin 2 with Ready Rig & Pro Arm Kit


Quick Overview


  • Most versatile professional 3-axis stabilization system

  • Monocoque carbon fiber frame design

  • High torque motors supporting cameras up to 30 lbs

  • Fine tune balancing for precision control

  • Self-heating hot-swappable batteries

  • On-board power for camera and accessories

  • Integrated camera controls

  • Built-in GPS & compatible with DJI A3 Flight Controller

Availability: In stock

$8,999.00
Price: $8,999.00
Available for Special Order

Details














  • 1x Ronin 2 Gimbal
  • 1x Ronin 2 Power Hub (w/ Camera Control Module)
  • 1x Camera Dovetail Plate
  • 1x Camera Top Cross Bar
  • 1x Remote Controller (w/ Neckstrap)
  • 1x TB50 Battery Mount
  • 2x Intelligent Battery (TB50)
  • 1x Battery Charger
  • 1x Battery Charger Power Cable
  • 1x Quad Charging Hub
  • 1x Grip (w/ Fold-away Feet and Top Mounting Block)
  • 1x Accessories Package (Screws & Hex Tool)
  • 1x Cables Package (Red Power Cable, Arri Alexa Mini Power Cable, CANBUS to 2-pin Power Cable, CANBUS to 5.5mm Power Cable, Triple P-tap Breakout Box, USB Type-C Data Cable, RED RCP Control Cable, Arri Alexa Mini Start/Stop Cable, SDI IN Cable, SDI OUT Cable, Remote Battery Mounting Cable, UART to D-BUS Cable, 1 each.)
  • 1x Quick Start Guide
  • 1x Monitor Mounting Bracket
  • 1x 15mm Rod Mount
  • 2x 15mm Rod
  • 1x Ronin 2 Universal Mount
  • 1x Water Tight Protective Case
  • 1x Ronin 2 MotionBlock
  • 1x Ready Rig Frame
  • 2x Shoulder mounts
  • 2x ProArm Carbon Fiber Support Rods
  • 2x Rear Tension Cables
  • 2x Universal Gimbal Attachments
  • 1x Ready Rig GS Bag
  • General

    Built-In Functions 

    Operation Modes
    -Underslung Mode
    -Upright Mode
    -Briefcase Mode
    -Handheld, Car Mount, Aerial & Tripod Mode

    Axis Modes

    -3-axis

    -Pan-Lock

    -Roll-360 (enabled through firmware update)
    Built-in, independent IMU module
    DJI Advanced 32-Bit ARM Processor
    DJI Specialized Gimbal Drive Motors with Encoders
    Dual Battery System
    Bluetooth Module
    D-Bus Receiver Supported
    2.4 GHz/5.8 GHz Receiver
    Temperature Sensors
    Built-in Touch Panel
    Built-in GPS
    USB Type-C Connection
    Power and Video Signal through Slip Ring



    Mechanical & Electrical Characteristics

    Working CurrentStatic current: 300 mA (@22.8 V)
    Dynamic current: 500 mA (@22.8 V)
    Locked motor current: Max 15 A (@22.8 V)
    Run Time8 hours
    2.5 hours (when powering gimbal, camera and accessories at the same time)
    Operating Temperature-4°F ~ 122°F (-20°C ~ 50°C)
    WeightIncluding handle bar: 14 lb (6.4 kg)
    Excluding handle bar: 11 lb (5.0 kg)
    Gimbal DimensionsExcluding handle bar: 350 mm (W) x 416 mm (D) x 530 mm (H)
    Including handle bar: 630 mm (W) x 416 mm (D) x 720 mm (H)


    Peripheral


    Camera Tray DimensionsMaximum depth from the center of gravity on camera base plate: 245 mm
    Maximum height measured from top of the camera base plate: 165 mm
    Maximum width: 180 mm
    Accessory Power Connections14.4 V x 4 Camera Cage (Combined 8 A), 14.4 V x 2 Pan Motor (Combined 4 A), 14 V x2 P-Tap (8 A)
    GCU Input PowerIntelligent Battery: 4280 mAh-22.8 V
    Connections2.4 GHz/5.8 GHz Remote Control, Bluetooth 4.0, USB Type-C
    PC Assistant Software RequirementsWindows 7 or above; Mac OS X 10.11 or above
    Mobile Assistant Software RequirementsiOS 9 or above; Android 4.4 or above


    Working Performance

    Load Weight (Reference Value)30 lbs (13.6 kg)
    Angular Vibration Range± 0.02°
    Maximum Controlled Rotation SpeedPan axis: 360°/s
    Tilt axis: 360°/s
    Roll axis: 360°/s
    Mechanical Endpoint RangePan axis control: 360° continuous rotation
    Tilt axis control: ±135°
    Roll axis control: ±220°
    Controlled Rotation RangePan axis control: 360° continuous rotation
    Tilt axis control: ±135°
    Roll axis control: ±30°
    Load Weight (Reference Value)30 lbs (13.6 kg)
    Angular Vibration Range± 0.02°
    Maximum Controlled Rotation SpeedPan axis: 360°/s
    Tilt axis: 360°/s
    Roll axis: 360°/s
    Mechanical Endpoint RangePan axis control: 360° continuous rotation
    Tilt axis control: ±135°
    Roll axis control: ±220°
    Controlled Rotation RangePan axis control: 360° continuous rotation
    Tilt axis control: ±135°
    Roll axis control: ±30°