0Item(s)

You have no items in your shopping cart.

Flir Dji

Product was successfully added to your shopping cart.

Request a quote for

DJI Ronin 2 3-Axis Handheld / Aerial Stabilizer

Need a Proposal or Have a Question? Please fill out the form below
and one of our aerial experts will be in touch immediately.

We would never share your information with third parties. Privacy Policy

Dronefly is an Authorized Dealer of

 

DJI Ronin 2 3-Axis Handheld / Aerial Stabilizer

SKU#:
S-DJI-RONIN-2-STABILIZER
//
MFG#:
CP.ZM.00000008.01

  • DJI Ronin 2
  • DJI Ronin 2
  • DJI Ronin 2

DJI Ronin 2 3-Axis Handheld / Aerial Stabilizer

  • DJI Ronin 2
  • DJI Ronin 2
  • DJI Ronin 2

Quick Overview


  • Most versatile professional 3-axis stabilization system

  • Monocoque carbon fiber frame design

  • High torque motors supporting cameras up to 30 lbs

  • Fine tune balancing for precision control

  • Self-heating hot-swappable batteries

  • On-board power for camera and accessories

  • Integrated camera controls

  • Built-in GPS & compatible with DJI A3 Flight Controller

Availability: In stock

$6,999.00
NO SALES TAX COLLECTED OUTSIDE CA

Sales Tax

Dronefly only collects sales tax on orders shipped to addresses in the State of California.

You may be responsible for state and local sales/use taxes when filing your tax returns. Please check your local sales tax laws.


Price: $6,999.00
IN STOCK & READY TO SHIP

Details














  • 1x Ronin 2 Gimbal
  • 1x Grip
  • 1x Dual TB50 Battery Mount
  • 1x Camera Top Cross Bar
  • 1x Camera Base Plate
  • 1x USB Type-C Data Cable
  • 1x Hex Tool
  • 5x Camera Screw 3/8"-16
  • 5x Camera Screw 1/4"-20
  • 8x Screws M4-10
  • 4x Screws 1/4

General

Built-In Functions 

Operation Modes
-Underslung Mode
-Upright Mode
-Briefcase Mode
-Handheld, Car Mount, Aerial & Tripod Mode

Axis Modes

-3-axis

-Pan-Lock

-Roll-360 (enabled through firmware update)
Built-in, independent IMU module
DJI Advanced 32-Bit ARM Processor
DJI Specialized Gimbal Drive Motors with Encoders
Dual Battery System
Bluetooth Module
D-Bus Receiver Supported
2.4 GHz/5.8 GHz Receiver
Temperature Sensors
Built-in Touch Panel
Built-in GPS
USB Type-C Connection
Power and Video Signal through Slip Ring



Mechanical & Electrical Characteristics

Working CurrentStatic current: 300 mA (@22.8 V)
Dynamic current: 500 mA (@22.8 V)
Locked motor current: Max 15 A (@22.8 V)
Run Time8 hours
2.5 hours (when powering gimbal, camera and accessories at the same time)
Operating Temperature-4°F ~ 122°F (-20°C ~ 50°C)
WeightIncluding handle bar: 14 lb (6.4 kg)
Excluding handle bar: 11 lb (5.0 kg)
Gimbal DimensionsExcluding handle bar: 350 mm (W) x 416 mm (D) x 530 mm (H)
Including handle bar: 630 mm (W) x 416 mm (D) x 720 mm (H)


Peripheral


Camera Tray DimensionsMaximum depth from the center of gravity on camera base plate: 245 mm
Maximum height measured from top of the camera base plate: 165 mm
Maximum width: 180 mm
Accessory Power Connections14.4 V x 4 Camera Cage (Combined 8 A), 14.4 V x 2 Pan Motor (Combined 4 A), 14 V x2 P-Tap (8 A)
GCU Input PowerIntelligent Battery: 4280 mAh-22.8 V
Connections2.4 GHz/5.8 GHz Remote Control, Bluetooth 4.0, USB Type-C
PC Assistant Software RequirementsWindows 7 or above; Mac OS X 10.11 or above
Mobile Assistant Software RequirementsiOS 9 or above; Android 4.4 or above


Working Performance

Load Weight (Reference Value)30 lbs (13.6 kg)
Angular Vibration Range± 0.02°
Maximum Controlled Rotation SpeedPan axis: 360°/s
Tilt axis: 360°/s
Roll axis: 360°/s
Mechanical Endpoint RangePan axis control: 360° continuous rotation
Tilt axis control: ±135°
Roll axis control: ±220°
Controlled Rotation RangePan axis control: 360° continuous rotation
Tilt axis control: ±135°
Roll axis control: ±30°
Load Weight (Reference Value)30 lbs (13.6 kg)
Angular Vibration Range± 0.02°
Maximum Controlled Rotation SpeedPan axis: 360°/s
Tilt axis: 360°/s
Roll axis: 360°/s
Mechanical Endpoint RangePan axis control: 360° continuous rotation
Tilt axis control: ±135°
Roll axis control: ±220°
Controlled Rotation RangePan axis control: 360° continuous rotation
Tilt axis control: ±135°
Roll axis control: ±30°