DJI Matrice 210 + Zenmuse XT2

Details

The DJI Matrice 210 was an instant hit with industrial inspection professionals the moment it was announced. The option to have dual downward gimbals for thermal and optical visuals in the same flight was leaps and bounds ahead of the competition, and the option for a single upward gimbal was perfect for inspectors that need to see the underside of structures.

Pairing the Matrice 210 with the Zenmuse XT2 opens a whole new set of opportunities. Not only does it eliminate the necessity of carrying two gimbals to get thermal and optical imagery in the same pass, it now actually allows that option in the upward gimbal configuration because of the Zenmuse XT2’s dual sensor setup.

Get more data per flight with up to 28 Minutes flight time with the Matrice 210 and Zenmuse XT2 when using TB55 batteries!


FLIR MSX Technology: Easily switch between or overlay visual and thermal views to see real time temperature information and a better understanding of the overall situation at hand.

Heat Track: Easily identify and lock onto the highest temperature in the thermal frame with this smart feature.

Temperature Alarm: This function alerts the operator if an area in the frame exceeds a certain temperature. This feature is perfect for inspection or for search and rescue.


Temperature Check: In radiometric images, each pixel contains individual temperature information. This gives operators detailed temperature data and allows users to get accurate temperature measurements with a simple tap of a pixel.

Quick Track: This function gives the pilot in command the ability to easily find and lock onto an object while providing operators a better way to focus on their intended target in challenging conditions. .


Water Resistance: The DJI Zenmuse XT2 is IP44 and M200/210 is IP43 rated - IP stands for Ingress Protection which is the international standard of classifying degrees of protection against objects and liquids. This standard goes into detail about the level of protection vs generic terms such as waterproof or water resistant. The first number after the IP denotes the levels of protection from solids on a scale from 0 – 6. Zero represents no protection against foreign objects, whereas a level 6 protection means that it has complete protection against dust. The DJI Zenmuse XT2 has a level 4 protection meaning that it is protected against objects greater than 1 mm in diameter.
The second digit denotes the amount of protection against liquids on a scale from 0-8. Zero being no protection and 8 being immersion beyond 1 Meter. With a rating of 4 it means that it is protected against splashing, spraying, and dripping water. However, it is not protected again water jets or full immersion. This IP44 rating on the new DJI Zenmuse XT2 camera is a significant upgrade from the previous XT model as there was no IP rating for it. Now with a protected camera payload on a Matrice 200/210 setup, this drone is ready for the skies even if it's raining. .

---

Includes DJI Care Enterprise Basic

DJI Care Enterprise is a service plan specially designed for DJI Enterprise drones. Providing complete accidental coverage and premium protection options that allow unlimited drone replacements - DJI Care Enterprise offers the most comprehensive reassured flying experience ever developed specifically for the needs of commercial drone fleets. DJI Care Enterprise allows you to fly with peace of mind and focus on the task at hand.

AIRCRAFT

• Model: M210
• Package Dimensions: 31.1×15.4×11.4inch (790×390×290mm)
• Dimensions (unfolded): 34.9×34.6×14.9 inch (887×880×378 mm)
• Dimensions (folded): 28.2×8.7×9.3 inch (716×220×236 mm)
• Folding Method: Folded Inward
• Diagonal Wheelbase: 25.3 inch (643 mm)
• Number of Batteries: 2
• Weight (TB50): Approx.3.84kg (with two standard batteries )
• Weight (TB55): Approx.4.57kg (with two standard batteries )
• Max Takeoff Weight: 6.14KG
• Max Payload (2 TB50): Approx.2.3kg (with two standard batteries )
• Max Payload (2 TB55): Approx.1.57kg (with two standard batteries )
• Hovering Accuracy (during safe flights): Vertical: ±0.5，Downward Vision System enabled: ±0.1
• Horizontal:: ±1.5，Downward Vision System enabled: ±0.3
• Max Angular Velocity Pitch: 300° /s；Yaw:150° /s
• Max Pitch Angle (Dual Downward Gimbals): P Mode: 25°（Forward Vision System enabled: 25°）； A Mode: 25°；S Mode: 30°
• Max Pitch Angle(Single Upward/Downward Gimbal): P Mode: 30°（Forward Vision System enabled: 25°）； A Mode: 30°；S Mode: 35°
• Max Ascent Speed: 16.4 ft/s (5 m/s)
• Max Descent Speed: Vertical: 9.8 ft/s (3 m/s)
• Max Speed(Dual Downward Gimbals): S Mode: 40.3mph (64.8kph)
• P Mode: 38mph (61.2kph)
• A Mode: 38mph (61.2kph)
• Max Speed (Single Upward/Downward Gimbals): S Mode: 51.4mph (82.8kph)
• P Mode: 38mph (61.2kph)
• A Mode: 51.4mph(82.8kph)
• Max Service Ceiling Above Sea Level: 1.86 miles (3000 m)
• Max Wind Resistance: 39.4 ft/s (12 m/s)
• Max Flight Time(No Payload, with TB50): 27min
• Max Flight Time(No Payload, with TB55): 38min
• Max Flight Time(Full Payload, with TB50): 13min
• Max Flight Time(Full Payload, with TB55): 24min
• Motor Model: DJI 3515
• Propeller Model: 1760S
• Retractable Landing Gear: Standard
• Operating Temperature: -4° to 113° F (-20° to 45° C)
• IP Rating: IP43

---

GIMBAL INSTALLATION

• Downward Gimbal Mount: Supported
• Upward Gimbal Mount: Supported
• Downward Dual Gimbal: Supported

---

CHARGER

• Model: IN2C180
• Voltage: 26.1 V
• Rated Power: 180 W

---

FORWARD VISION SYSTEM

• Obstacle Sensing Range: 2.3-98.4 feet (0.7-30 m)
• FOV: Horizontal 60°，Vertical 54°
• Operating Environment: Surfaces with clear patterns and adequate lighting (> 15 lux)

---

DOWNWARD VISION SYSTEM

• Velocity Range: <32.8 ft/s (10 m/s) at height of 6.56 feet (2 m)
• Altitude Range: <32.8 feet (10 m)
• Operating Range: <32.8 feet (10 m)
• Operating Environment: Surfaces with clear patterns and adequate lighting (> 15 lux)
• Ultrasonic Sensor Operating Range: 0.33-16.4 feet (10-500 cm)
• Ultrasonic Sensor Operating Environment: Non-absorbing material, rigid surface (thick indoor carpeting will reduce performance)

---

GIMBALS

• Compatible Gimbals:
• Zenmuse X4S
• Zenmuse X5S
• Zenmuse Z30
• Zenmuse XT

---

BATTERY

• Model: TB50
• Capacity: 4280 mAh
• Voltage: 22.8V
• Battery Type: LiPo 6S
• Energy: 97.58 Wh
• Net Weight: Approx. 520 g
• Operating Temperature: -20°C to 45° C
• Storage Temperature:
• Less than 3 months: -4° to 113° F (-20° to 45° C)
• More than 3 months: 72° to 82° F (22° to 28° C)
• Charging Temperature: 41° to 104° F (5° to 40° C)
• Max Charging Power: 180 W
• Model: TB55
• Capacity: 7660 mAh
• Voltage: 22.8V
• Battery Type: LiPo 6S
• Energy: 176.93Wh
• Net Weight: Approx. 885 g
• Operating Temperature: -4° to 113° F (-20° to 45° C)
• Storage Temperature:
• Less than 3 months: -20° C to 45° C
• More than 3 months: 22° C to 28° C
• Charging Temperature: 41° to 104° F (5° to 40° C)
• Max Charging Power: 180 W

---

UPWARD INFRARED SENSOR

• Obstacle Sensing Range: 0-16.4 feet (0-5 m)
• FOV: ±5°
• Operating Environment: Large, diffuse and reflective obstacles (reflectivity >10%)

---

CENDENCE

• Type: GL800A
• Operating Frequency: 2.400-2.483 GHz; 5.725-5.825 GHz
• Max Transmitting Distance (unobstructed, free of interference): 2.4 GHz: 4.3 miles (7 km, FCC); 2.2 miles (3.5 km, CE); 2.5 miles (4 km, SRRC)
• 5.8 GHz: 4.3 miles (7 km, FCC); 1.2 miles (2 km, CE); 3.1 miles (5 km, SRRC)
• EIRP: 2.4 GHz: 26 dBm (FCC); 17 dBm (CE); 20 dBm (SRRC)
• 5.8 GHz: 28 dBm (FCC); 14 dBm (CE); 20 dBm (SRRC)
• Power Supply: Extended Intelligent Battery (Model: WB37-4920mAh-7.6V)
• Intelligent Battery: 4923 mAh LiPo
• Charging: DJI charger
• Output Power: 20 W (supplying power to DJI CS550 monitor)
• 12 W (without supplying power to monitor)
• Video Output Ports: USB, HDMI, SDI
• USB Supply Power: iOS: 1 A, 5.2 V (Max); Android: 1.5 A, 5.2 V (Max)
• Dual User Capability: Master-and-Slave connection
• Operating Temperature: -4 ° to 104 °F (-20 ° to 40 °C)
• Storage Temperature:
• Less than 3 months: -4 ° to 113 °F (-20 °to 45 °C)
• More than 3 months:: 72 °to 82 °F (22 °to 28 °C)
• Charging Temperature: 32 ° to 104 °F (0 °to 40 °C)
• Charging Time: About 2 hours and 24 minutes (using a 180 W charger)
• Supply Power Time: About 4 hours (only Master remote controller function enabled and without supplying power to monitor)
• Weight: 1041 g

---

DJI GO 4 APP

• Name: DJI GO 4
• Mobile Device System Requirements: iOS 9.0 or later,Android 4.4.0 or later
• Supported Mobile Devices: iOS:iPhone 5s, iPhone SE, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone 7, iPhone 7 Plus, iPad Air, iPad Air Wi-Fi + Cellular,
• iPad mini 2, iPad mini 2 Wi-Fi + Cellular, iPad Air 2, iPad Air 2 Wi-Fi + Cellular, iPad mini 3, iPad mini 3 Wi-Fi + Cellular, iPad mini 4 and iPad mini 4 Wi-Fi + Cellular.
• This app is optimized for iPhone 7, iPhone 7 Plus. Android:Samsung tabs 705c, Samsung S6, Samsung S5, Samsung NOTE4, Samsung NOTE3, Google Nexus 6p,
• Nexus 9, Google Nexus 7 II, Ascend Mate7, Huawei P8 Max, Huawei Mate 8, LG V20, Nubia Z7 mini, Sony Xperia Z3, MI 3, MI PAD, Smartisan T1.
• *Support for additional devices available as testing and development continues.

Zenmuse XT2 R Specifications