{"product_id":"micasense-rededge-mx-multispectral-kit","title":"MicaSense RedEdge-MX Multispectral Kit","description":"\u003ch2\u003eMicaSense RedEdge-MX Multispectral Kit: Calibrated Five-Band Data for Field-Scale Crop Analysis\u003c\/h2\u003e\n\u003cp\u003eThe MicaSense RedEdge-MX Multispectral Kit is a five-band sensor package built to turn drone flights into calibrated crop-health data. Five global shutter imagers record blue, green, red, red edge, and near-infrared light at 1280×960 pixels each, while a DLS 2 light sensor logs ambient light and sun angle alongside every capture. Flown at 400 ft (120 m), the sensor resolves 3.14 in (8 cm) per pixel in each band. Results feed orthomosaics, NDVI and NDRE vegetation indices, and reflectance maps. The sensor is made in the USA.\u003c\/p\u003e\n\u003cp\u003eA CRP2 reflectance panel anchors each mission with reference images taken before and after the flight. The kit also bundles a CFexpress card with reader, USB Wi-Fi dongle, integration cables, mounting hardware, lens cover, hard carrying case, and start guide, so crews can unpack and prepare from one box. Imagery is saved as TIFF files for Pix4D and Agisoft, and a DJI Matrice 300 or 350 needs the SkyPort kit, which is sold separately. Camera settings are configured from a browser page over Wi-Fi.\u003c\/p\u003e\n\u003ch3\u003eKey Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMultiband capture: Blue, green, red, red edge, and near-infrared simultaneously\u003c\/li\u003e\n\u003cli\u003ePixel detail: Resolves 3.14 in (8 cm) per pixel per band\u003c\/li\u003e\n\u003cli\u003eDistortion control: Global shutter imagers reduce distortion from aircraft motion\u003c\/li\u003e\n\u003cli\u003eSun angle data: DLS 2 logs light conditions with embedded GPS\u003c\/li\u003e\n\u003cli\u003eReflectance reference: CRP2 panel images anchor calibration at each flight\u003c\/li\u003e\n\u003cli\u003eImager output quality: Five 1280×960 imagers deliver 12-bit data per capture\u003c\/li\u003e\n\u003cli\u003eCapture cadence: Roughly one capture per second across every band\u003c\/li\u003e\n\u003cli\u003eCompact build: Weighs 8.18 oz (231.9 g) including DLS 2\u003c\/li\u003e\n\u003cli\u003eSoftware ready: TIFF output suits Pix4D and Agisoft processing workflows\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRepeatable Results Across Every Season\u003c\/h3\u003e\n\u003cp\u003eFor a single aircraft, the kit is a complete path to calibrated five-band data. For a fleet, the same sensor, panel, and light-sensor routine keep results consistent from one aircraft and operator to the next. The recorded light data and the panel reference travel with each flight into processing, and TIFF output moves directly into Pix4D or Agisoft. Global shutter imagers need no gimbal, so integration stays straightforward. Operators get the same workflow on every aircraft. One kit can serve repeat surveys over many seasons without replacing hardware, which spreads its cost across every survey.\u003c\/p\u003e\n\u003ch3\u003eCompatibility and System Integration\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 RedEdge-MX five-band sensor with global shutter imagers and lens cover (included)\u003c\/li\u003e\n\u003cli\u003e1 DLS 2 light sensor recording light and sun angle (included)\u003c\/li\u003e\n\u003cli\u003e1 CRP2 reflectance panel with pre-measured visible and near-infrared values (included)\u003c\/li\u003e\n\u003cli\u003e1 CFexpress card, 1 CFexpress card reader, 1 USB Wi-Fi dongle (included)\u003c\/li\u003e\n\u003cli\u003e1 hard carrying case, integration cables, mounting hardware, start guide (included)\u003c\/li\u003e\n\u003cli\u003eDJI SkyPort kit for Matrice 300 and 350 mounting (sold separately)\u003c\/li\u003e\n\u003cli\u003ePix4D or Agisoft software to process TIFF captures (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications and Use Cases\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStress mapping: finds plant stress by zone across large production fields\u003c\/li\u003e\n\u003cli\u003ePlot comparison: supports phenotyping programs that need calibrated reflectance values\u003c\/li\u003e\n\u003cli\u003eInput planning: NDVI and NDRE maps guide fertilizer and irrigation plans\u003c\/li\u003e\n\u003cli\u003eProblem detection: locates disease, pest, and nutrient deficiency issues in crops\u003c\/li\u003e\n\u003cli\u003eSeason tracking: repeat flights reveal trends across the same acreage\u003c\/li\u003e\n\u003cli\u003eRestoration monitoring: tracks revegetation and land recovery with repeatable multispectral surveys\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRepeatable inputs matter more than any single map, and this kit standardizes them with fixed bands, a calibration panel, and logged light data. Teams that fly the same fields all season get results they can compare from one flight to the next.\u003c\/p\u003e\n\u003cp\u003eThe RedEdge-MX kit fits a single-aircraft operation as easily as a multi-unit fleet, and Dronefly carries it for both. Pair it with the SkyPort kit and processing software that suit your airframe and workflow. Buy the MicaSense RedEdge-MX Multispectral Kit direct from Dronefly today.\u003c\/p\u003e","brand":"MicaSense","offers":[{"title":"Default Title","offer_id":54577746575653,"sku":"S-MICA-REMX","price":3600.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0884\/4908\/9829\/files\/MicaSense-RedEdge-MX-Multispectral-Kit.webp?v=1795089552","url":"https:\/\/www.dronefly.com\/products\/micasense-rededge-mx-multispectral-kit","provider":"DroneFly","version":"1.0","type":"link"}