Skip to product information
1 of 1

MicaSense RedEdge-MX Multispectral Kit

MicaSense RedEdge-MX Multispectral Kit

Regular price $3,600.00
Regular price Sale price $3,600.00
Sale Sold out
SKU S-MICA-REMX MPN 805-00041
  • Records five spectral bands during every single flight
  • Resolves 3.14 in (8 cm) per pixel per band
  • Logs light and sun angle with the DLS 2
  • Anchors calibration with the included CRP2 reflectance panel
  • Limits motion distortion using five global shutter imagers
  • Stores captures on an included CFexpress card with reader
  • Supports NDVI, NDRE, orthomosaic, and reflectance map outputs
  • Weighs just 8.18 oz (231.9 g) with DLS 2
  • Mounts on Matrice 300 and 350 via separate SkyPort
View full details
  • Description
  • Specifications
  • In the Box
  • FAQ

MicaSense RedEdge-MX Multispectral Kit: Calibrated Five-Band Data for Field-Scale Crop Analysis

The MicaSense RedEdge-MX Multispectral Kit is a five-band sensor package built to turn drone flights into calibrated crop-health data. Five global shutter imagers record blue, green, red, red edge, and near-infrared light at 1280×960 pixels each, while a DLS 2 light sensor logs ambient light and sun angle alongside every capture. Flown at 400 ft (120 m), the sensor resolves 3.14 in (8 cm) per pixel in each band. Results feed orthomosaics, NDVI and NDRE vegetation indices, and reflectance maps. The sensor is made in the USA.

A CRP2 reflectance panel anchors each mission with reference images taken before and after the flight. The kit also bundles a CFexpress card with reader, USB Wi-Fi dongle, integration cables, mounting hardware, lens cover, hard carrying case, and start guide, so crews can unpack and prepare from one box. Imagery is saved as TIFF files for Pix4D and Agisoft, and a DJI Matrice 300 or 350 needs the SkyPort kit, which is sold separately. Camera settings are configured from a browser page over Wi-Fi.

Key Features and Benefits

  • Multiband capture: Blue, green, red, red edge, and near-infrared simultaneously
  • Pixel detail: Resolves 3.14 in (8 cm) per pixel per band
  • Distortion control: Global shutter imagers reduce distortion from aircraft motion
  • Sun angle data: DLS 2 logs light conditions with embedded GPS
  • Reflectance reference: CRP2 panel images anchor calibration at each flight
  • Imager output quality: Five 1280×960 imagers deliver 12-bit data per capture
  • Capture cadence: Roughly one capture per second across every band
  • Compact build: Weighs 8.18 oz (231.9 g) including DLS 2
  • Software ready: TIFF output suits Pix4D and Agisoft processing workflows

Repeatable Results Across Every Season

For a single aircraft, the kit is a complete path to calibrated five-band data. For a fleet, the same sensor, panel, and light-sensor routine keep results consistent from one aircraft and operator to the next. The recorded light data and the panel reference travel with each flight into processing, and TIFF output moves directly into Pix4D or Agisoft. Global shutter imagers need no gimbal, so integration stays straightforward. Operators get the same workflow on every aircraft. One kit can serve repeat surveys over many seasons without replacing hardware, which spreads its cost across every survey.

Compatibility and System Integration

  • 1 RedEdge-MX five-band sensor with global shutter imagers and lens cover (included)
  • 1 DLS 2 light sensor recording light and sun angle (included)
  • 1 CRP2 reflectance panel with pre-measured visible and near-infrared values (included)
  • 1 CFexpress card, 1 CFexpress card reader, 1 USB Wi-Fi dongle (included)
  • 1 hard carrying case, integration cables, mounting hardware, start guide (included)
  • DJI SkyPort kit for Matrice 300 and 350 mounting (sold separately)
  • Pix4D or Agisoft software to process TIFF captures (sold separately)

Applications and Use Cases

  • Stress mapping: finds plant stress by zone across large production fields
  • Plot comparison: supports phenotyping programs that need calibrated reflectance values
  • Input planning: NDVI and NDRE maps guide fertilizer and irrigation plans
  • Problem detection: locates disease, pest, and nutrient deficiency issues in crops
  • Season tracking: repeat flights reveal trends across the same acreage
  • Restoration monitoring: tracks revegetation and land recovery with repeatable multispectral surveys

Repeatable inputs matter more than any single map, and this kit standardizes them with fixed bands, a calibration panel, and logged light data. Teams that fly the same fields all season get results they can compare from one flight to the next.

The RedEdge-MX kit fits a single-aircraft operation as easily as a multi-unit fleet, and Dronefly carries it for both. Pair it with the SkyPort kit and processing software that suit your airframe and workflow. Buy the MicaSense RedEdge-MX Multispectral Kit direct from Dronefly today.

Imaging

  • Spectral bands: 5 (Blue 475 nm / 20 nm, Green 560 nm / 20 nm, Red 668 nm / 10 nm, Red Edge 717 nm / 10 nm, Near-IR 840 nm / 40 nm, center wavelength / bandwidth)
  • Resolution: 1280 × 960 (1.2 MP) per imager, 12-bit output
  • Field of view: 47.2° horizontal, 35.4° vertical
  • GSD: 3.14 in (8 cm) per pixel per band at 400 ft (120 m); about 1.57 in (4 cm) at 197 ft (60 m)
  • Capture rate: about 1 capture per second
  • Shutter: global shutter
  • Image format: TIFF

Physical

  • Weight: 8.18 oz (231.9 g) with DLS 2 and cables
  • Dimensions: 3.27 × 2.32 × 1.79 in (83 × 59 × 45.4 mm)
  • DLS 2 weight: 1.73 oz (49 g)
  • DLS 2 dimensions: 2.50 × 1.82 × 0.55 in (63.5 × 46 × 14.03 mm)

Power and connectivity

  • Input voltage: 4.0 to 15.8 V DC (5.0 V nominal)
  • Power draw: 3.5 W average, 8.0 W peak
  • Ports: PWR/TRG (power and external trigger), COMM (TTL serial and Ethernet), USB Type A (Wi-Fi module)
  • Configuration: web-based page over Wi-Fi
  • Storage: CFexpress card (included) with card reader
  • 1x MicaSense RedEdge-MX sensor
  • 1x DLS 2 light sensor with embedded GPS
  • 1x CRP2 calibrated reflectance panel
  • 1x USB Wi-Fi dongle
  • 1x CFexpress card
  • 1x CFexpress card reader
  • 1x Integration cables (set)
  • 1x Assorted mounting hardware (set)
  • 1x Lens cover
  • 1x Hard carrying case
  • 1x Start guide
What comes in the box with the RedEdge-MX kit?

The kit contains the RedEdge-MX sensor, a DLS 2 light sensor (GPS built in), and a CRP2 calibrated reflectance panel. It also includes a hard carrying case, a start guide, a lens cover, integration cables, mounting hardware, a CFexpress card with its reader, and a USB Wi-Fi dongle. The DJI SkyPort kit is not part of the package.

Is the RedEdge-MX compatible with the DJI Matrice 400?

The Matrice 400 is not supported at this time. The DJI SkyPort is fully supported on the Matrice 300 RTK and Matrice 350 RTK. The SkyPort kit is sold separately, and the DLS 2 needs its own mount.

How does the DLS 2 improve data quality?

During flight, the DLS 2 tracks ambient light and sun angle for each of the five bands. Its embedded GPS provides position data to the camera unless another source supplies it. Processing software uses this light record to correct for changing conditions across a mission.

When should I photograph the reflectance panel?

Capture the CRP2 before and after each flight for best results. The panel carries pre-measured reflectance values across the visible and near-infrared spectrum. Those reference images give processing software a known target for converting captures into reflectance.

What ground resolution does the sensor deliver?

At 400 ft (120 m), each band resolves 3.14 in (8 cm) per pixel. At 197 ft (60 m), the figure improves to about 1.57 in (4 cm). Lower altitudes give finer detail but cover less ground on each pass.

Which software opens RedEdge-MX captures?

Captures are saved as TIFF files. Pix4D and Agisoft can both turn those files into orthomosaics, vegetation indices, and reflectance maps. Both packages are sold separately from the kit.